Gasboy CFN Series Site Controller III Start-up - Manual (Page 64)

Component Power-up and Configuration Configuring the PPC
Page 58 MDE-4793A CFN Series Site Controller III Start-up Manual for CFN III Versions 3.5 and above · November 2008
Electronic Pumps and Dispensers
Locate and turn on power switches. Refer to the Pump Interface Manual or call Gasboy
Technical Service for information.
Standalone Receipt Printer (optional)
Locate the AC power switch on the front of the unit. Push the switch to the right (ON)
position.
FPR (if used)
Locate and turn on the power switch in the top-left side of the FPR. Verify if the power supply
LED, visible through the perforated screen, is lit. Verify if the two RS-485 LEDs, DL3 and
DL4 on the FPR CPU PCB, are flashing.
Configuring the PPC
Access the Main Menu from PPC
To access the main menu from PPC, proceed as follows:
1 Turn the Manager’s key to MGR position.
2 Sign on (if required).
3 Press SPEC FUNC, 0 and ENTER. The Main Menu displays.
Note: To return to POS mode, select 1 on the Main Menu and press ENTER.
Access the Main Menu from SC III/POS WS
To access the main menu from SC III/POS WS, proceed as follows:
1 Minimize the SC III window and double-click on the PP icon.
2 Sign on (if required).
3 Press SPEC FUNC, 0 and ENTER. The Main Menu displays.
Note: To return to POS mode, select 1 on the Main Menu and press ENTER.
4 On the Profit Point Main Menu, press 4 (or C) and ENTER. This displays the Configuration
Menu
5 Select configuration options by selecting the number or first letter of the option and pressing
ENTER.
Note: The options are 1: Software, 2: Hardware, 3: Keyboard, and 4: Setup config.pos file.