Gasboy CFN Series Site Controller III Start-up - Manual (Page 65)

MDE-4793A CFN Series Site Controller III Start-up Manual for CFN III Versions 3.5 and above · November 2008 Page 59
Configuring the PPC Component Power-up and Configuration
Software Configuration
Type 1 (or S) and press ENTER to display the Software Configuration menu.
When you select an entry, a submenu appears allowing you to select the desired options for
that entry. The entries are as follows:
1 Training mode off-hook rate Enter a value from 1 (slowest) to 9 (fastest)
2 Show change as coins and bills Shows yes to show change, or no
3 Minimum age to buy ask-ID items Shows one or two ID ages, depending on selections
4 Product totals kept in PLU file Shows yes to update product totals, or no
5 Keep file of missing items Shows yes to keep a file, or no
6 Off-hook beep rate Enter a value (15 seconds, standard) for length of time between 3
beep signals indicating pump is off-hook
7 Validate checks Prints date, time, register number, clerk number, and amount
tendered on checks accepted
8 Enter birthdate when ID required Select 1 for require; select 2 for do not require
9 Head Clerk signon Enter user ID and password for head clerk. Used for keyswitch
position 2 when 5-position keyswitch is used.
Hardware Configuration
Type 2 (or H) and press ENTER to display the Hardware Configuration menu. When you
select an entry, a submenu appears allowing you to select the desired options for that entry.
The entries are as follows:
1 Console address Enter address of console
2 Address of printer/PIN pad Enter address of PIN pad
3 Type of PIN pad used Four choices: local (keyboard), Ingenico Verifone, none
4 Customer display type Two choices: Ultimate, IEE
5 Profit Point type Two choices: modular, integral
6 Bar code scanner Select enabled/disabled
7 Key switch type Three choices: 2-position, 3-position, 5-position
8 Drawer type Four choices: switch open = drawer open, switch open = drawer
closed, drawer on printer (requires Epson serial printer), no cash
drawer
9 Host IP address Not used at this time
Keyboard Configuration
Keyboard may be different for every site. Refer to MDE-4356 Profit Point Reference Manual
for keyboard configuration details.
Set Up CONFIG.POS File
When you set up the CONFIG.POS file, you specify the special network cards your site
accepts, the user-defined menus you want, the sale discounts you offer, the permission level
required to use each of the Profit Point’s special functions, and idle messages for display.
Refer to MDE-4356 Profit Point Reference Manual for details.