Gasboy CFN Series Site Controller III Start-up - Manual (Page 86)

Start-up Commands Sign-on and Preliminary Steps
Page 80 MDE-4793A CFN Series Site Controller III Start-up Manual for CFN III Versions 3.5 and above · November 2008
Sign-on and Preliminary Steps
Sign-on
To sign on, proceed as follows:
1 Press RETURN.
The system responds with the prompt “Sign on”.
2 Type 97, GASBOY and then press RETURN.
(The user 97 and the word GASBOY shown in
Figure 13-1 are for example only. They are not
displayed as you type).
Figure 13-1: Example of SIGN-ON Entry with Response
SIGN ON: 97,GASBOY
CPU ID = 00104146 (usually 8 digits)
Pass Key = F7E1 3BDF 186C 14BD (16 DIGITS)
Note: The CPU ID will be different for each PC Site Controller and the Pass Key will be
different every time you sign on as User 97.
3 To obtain your initial password, contact the Gasboy Technical group at
1-800-444-5529. Provide the CPU ID number and the Pass Key alpha-numeric information
displayed on the monitor to the TAC representative, clearly and accurately.
The TAC representative will provide you a Password consisting of 16 characters
( Figure 13-2 ).
Figure 13-2: Example of Initial Password from TAC
Example: 456E 98CD A123 B987