Gasboy CFN Series Site Controller III Start-up - Manual (Page 20)

Site Information Broadcast Messages
Page 14 MDE-4793A CFN Series Site Controller III Start-up Manual for CFN III Versions 3.5 and above · November 2008
Broadcast Messages
Note: Refer to MDE-4762 Site Controller III Manager’s Manual for Windows XP Embedded,
LO ME command.
Broadcast Message
(20 characters maximum)
Display Time in Seconds Message # 1.
Display Time in Seconds Message # 2.
Display Time in Seconds Message # 3.
Display Time in Seconds Message # 4.
Display Time in Seconds Message # 5.
Display Time in Seconds Message # 6.
Display Time in Seconds Message # 7.
Display Time in Seconds Message # 8.
Display Time in Seconds Message # 9.
Display Time in Seconds Message # 10.
Load Product - Fuels
Note: Refer to MDE-4762 Site Controller III Manager’s Manual for Windows XP Embedded,
LO PRO command.
Use the following table to list the site’s fuel products. Use one product code for each different
fuel product. These product codes can be linked to authorization codes when used with
private-issue cards. They are also used to assign products to tanks and pumps. In addition to
the product code, category, and name, three other prompts appear when you execute this
command: minimum price, maximum price, and tax. These should all be set to zero for fuel
products. If you need additional space, photocopy this chart.
Product Code Product Category Product Name
Note: Fuel categories are usually 1 or 1 and 2.