Gasboy CFN Series Site Controller III Start-up - Manual (Page 28)

Site Information Profit Point Product Layout
Page 22 MDE-4793A CFN Series Site Controller III Start-up Manual for CFN III Versions 3.5 and above · November 2008
Profit Point Product Layout
Note: Refer to MDE-4762 Site Controller III Manager’s Manual for Windows XP Embedded,
LO PRO command; MDE-4356 Profit Point Reference Manual, Prompts for PLU
Fields.
Before configuring the Profit Point, your SC should already be set up with the following:
products/departments, prices (fuels only), tanks, pumps, and taxes. You can transfer this
information directly to the Profit Point by using the POS.CMD command. This will make it
easier to enter your MASTER.PLU information on the Profit Point.
The MASTER.PLU file contains three types of data: department numbers, UPC codes, and
stock numbers. The charts on the following three pages will help you organize the information
for each product.
Notes on Form Entries
The following descriptions are abbreviated versions of the entries used in the three worksheets
that follow. Refer to MDE-4356 Profit Point Reference Manual for detailed information on
these input requirements.
Dpt = department number corresponding to the SC’s department (Prd). Refer to Step 19. Will
always be present for departments if POS.CMD has been run.
Grp = optional group number assigned to each product.
Vnd = up to 255 vendor numbers can be defined.
Description = description (name) of department or product. Refer to Step 19. Will already be
present for departments if POS.CMD has been run.
Ceiling = corresponds to $MAX price on SC. Refer to Step 19. Will already be present for
departments if POS.CMD has been run.
Floor = corresponds to $MIN price on SC. Refer to Step 19. Will already be present for
departments if POS.CMD has been run.
Retail Price = selling price of this product (on departments, default price)
Per = unit upon which price is calculated.
Cost + Markup = formula to calculate price: Retail = Cost + (Cost x markup %).
Rounding = no rounding or rounding up to 5 or 9.
Food Stamps = food stamps, enter Y for yes or N for no.
Disct = is discount allowed, enter Y for yes or N for no.