Gasboy CFN Series Site Controller III Start-up - Manual (Page 11)

MDE-4793A CFN Series Site Controller III Start-up Manual for CFN III Versions 3.5 and above · November 2008 Page 5
Filling Out the Start-up Form Starting a Site Controller III System
Filling Out the Start-up Form
A sample filled-out Start-up Form appears at the end of this manual. You should already have
blank copies of the Start-up Form. However, if you do not, you can obtain more by calling
GASBOY Customer Service. Use the Start-up Form when starting-up or commissioning the
site. Also retain the Start-up Form for your company records. To commission the site for full
factory warranty, call Gasboy contract check-in at 888-800-7498.
If the site is not commissioned, no warranty or payment will be provided by Gasboy.
IMPORTANT INFORMATION
When encountering an empty box on the form, fill in all the information requested. If an
option is not used or does not apply, fill in N/A (not applicable) in that space. It may be helpful
to have the terminal operator review MDE-4762 Site Controller III Manager’s Manual for
Windows XP Embedded, if they have not already done so, while you are starting up the
system.
The Start-up Form must be filled out completely for reference when commissioning the site.
Ensure that you retain a copy of the completed form for your own records.
Using This Manual
This manual is designed to be followed from start to finish. The procedures are listed in a
logical order and correspond to the layout of the Start-up Form. Follow the step-by-step
procedures in this manual.
Note: The SC III can be equipped with a Point Of Sale (POS) Work Station (WS) option. This
enables it to work as a Profit Point, as well as control system activity. Throughout the
manual, this configuration is referred to as the SC III/POS WS. If your site has a SC III/
POS WS, you will need to refer to both a SC III Installation Manual and a Profit Point
Installation Manual.