Comtech EF Data VMS v3.12.x Vipersat - Manual (Page 96)

VMS Web Services Installation & Configuration MN/22156, rev 12
2-56 VMS User Guide
Figure 2-66 VMS SOAP Server Configuration
• VCS Port
This parameter specifies the TCP port used by the SOAP Server for the
VCS ArrangeLink application. The default port is decimal 8082. Any
available port can be specified, provided that the client VCS applications
send their request to this port.
• VNO Port
This parameter specifies the TCP port used by the SOAP Server for the
VNO application. The default port is decimal 8080. Any available port can
be specified provided that the client VNO applications send their request
to this port.
• Basic User Authentication
This check box indicates whether the Basic User Authentication is enabled
or not. If enabled, each client request contains a user name and password
in the HTTP header. The SoapAdmin.exe utility is used to configure the
user database and privilege levels. This utility is located in the VMS-
installed directory Program Files\Vipersat\VMS\3.0\bin .
• VMS Server IP
This parameter specifies the IP address(es) of the VMS server(s). In a
stand-alone VMS configuration, enter the one VMS server IP address. In a
redundant VMS configuration, up to nine addresses can be entered (e.g.,
for all VMS servers in the same redundancy group).