Comtech EF Data VMS v3.12.x Vipersat - Manual (Page 188)

Network Manager Configuration MN/22156, rev 12
3-88 VMS User Guide
Remote Site Wizard
Creating and populating a Remote site with the use of the Remote Site Wizard
tool greatly simplifies the process by directing the user with a scripted set of
dialogs. And, by selecting an existing Remote site as a reference, a pre-defined
default template is provided that automates the operation, allowing additional
Remote sites to be generated rapidly.
Note: The procedure presented here utilizes the reference site feature.
Although this is optional and a Remote site can be created without this
step, the template approach is one of the most powerful features of the
Site Wizard tool. Without it, additional operator/user input is required for
configuration.
Caution: When specifying a Reference Site, be aware of the following
restrictions:
Do not specify a reference site that utilizes a different Network and/or
Satellite than the new site that is being created.
Although the reference site does not have to be in the same Group as
the site that is being created, be aware that none of the reference
site’s inherited application policies will be copied to the new site in
this situation.
1. Select Create Remote... from the Network (or from the Group, if the site is
to be a member of an existing group within the network) drop-down menu,
as shown in figure 3-95.
NOTE