Comtech EF Data VMS v3.12.x Vipersat - Manual (Page 212)

Network Manager Configuration MN/22156, rev 12
3-112 VMS User Guide
Figure 3-126 Selecting ROSS Unit for SOTM
4. Double-click on the Subnet to display the subnet components.
5. Select the ROSS unit and click OK.
6. The selected ROSS unit will appear in the remote’s Properties dialog.
Click Apply and Close the window.
Figure 3-127 SOTM Remote Configured
At this point, the Remote site icon will snap to a location on the globe based
on the GPS reading that the ROSS is receiving from the antenna.
7. Repeat the above procedure for all mobile remote sites.