Comtech EF Data VMS v3.12.x Vipersat - Manual (Page 383)

Chapter 7 - Out-of-Band Units 7-27
MN/22156, rev 12 Switching Out-of-Band Modems
Description field text entry: use Ctrl+Enter to create a new line independent
of text wrap.
Figure 7-23 Circuit Identification, Custom
4. Click the Next button to display the Circuit Configuration dialog
(figure 7-24).
The sequence for configuring this dialog is marked in red in the figure.
5. Click on the Managed Device bar to select the first managed device (for the
first channel). In the example used here, this will be the broadcast modulator
at the Hub.
The Select Object window will open with the antenna and subnet for this
site.
6. Navigate through the Select Object window to select the target device:
Double-click on the subnet, then double-click on the appropriate OOB
modem. Select the device that is to be managed and click OK.
The Managed Device bar will now be labeled with the name of the selected
device (figure 7-25).