Comtech EF Data VMS v3.12.x Vipersat - Manual (Page 135)

Chapter 3 - VMS Configuration 3-35
MN/22156, rev 12 RF Manager Configuration
Create Antenna Devices
The following steps cover the creation of the antenna Up converters and Down
converters.
1. Right-click on an Antenna icon and select Create Up Converter
(figure 3-32).
Figure 3-32 Create Up Converter menu command
2. The dialog box shown below (figure 3-33) will open. Specify a Name for
this device.
It is important to ensure that the Up Converter Frequency setting is correct,
as this is a very common source of error which breaks the switching engine.