Comtech EF Data VMS v3.12.x Vipersat - Manual (Page 295)

Chapter 5 - Configuring ROSS Units 5-7
MN/22156, rev 12 Status and Control
Select the desired Service Bound from the displayed list. Next, set the handoff
mode to be used:
• If the SA selected for handoff is outside the currently detected area, set the
mode for Force Manual handoff by enabling the Disable Auto and Force
check boxes.
• If the SA selected for handoff is within the currently detected area, set the
mode for Force handoff by enabling the Force check box.
Click on the Handoff button to initiate the manual handoff operation.
After making a selection, the ROSS will override the current location, pushing
the selected SA configurations to the modem and the ACU.
To restore handoff operations to Automatic mode, uncheck the Disable Auto
option.
The complete definition and configuration of service areas are described in
section 5.0, ROSS Configuration Editor, in the ROSS User Guide.
Get Event Log
Upon startup, the system records internal processes and events that are useful
when troubleshooting failure conditions and improper operations. The Event
Log records all ROSS events, sorting oldest to latest.
Figure 5-5 ROSS Event Log