Comtech EF Data VMS v3.12.x Vipersat - Manual (Page 454)

Configuring SNMP Traps MN/22156, rev 12
D-4 VMS User Guide
Select the Traps tab to display the SNMP Manager TRAP dialog shown in
figure D-3. You can enter the Trap’s destination information consisting of:
• IP address of SNMP manager receiving trap
• Port number
• Community String
Figure D-3 Server Traps Tab
Insert
Clicking the Insert button displays the Trap Destination dialog shown in
figure D-4 allowing you to enter the Trap’s destination:
• IP Address
• Community String
• Port Number
Figure D-4 Trap Desitination