Comtech EF Data VMS v3.12.x Vipersat - Manual (Page 165)

Chapter 3 - VMS Configuration 3-65
MN/22156, rev 12 Network Manager Configuration
Figure 3-72 Edit Reservation dialog
For Carrier Presence Switching applications, enter the value for the site’s
oversubscription rate as the Ideal Rate, and activate the Minimum Rate
parameter and enter the guaranteed rate. Refer to the section “Carrier
Presence Switching” on page E-36 for additional information on this feature
and its configuration.
Note that the default setting is 0 bps. Units must be included in the
entry—use bps, kbps, or Mbps.
3. Select the Transmission Parameters Extra (...) button to set FEC & Modula-
tion required for this CIR.
Clicking on a parameter will display the pull-down menu for that item. Set
the parameters as required, then click on OK.
.
Figure 3-73 Edit, Additional Transmission Parameters
4. Click in the Enable Reservation check box to select this bandwidth reserva-
tion for the satellite, then click OK.
5. Click on Apply to define the guaranteed rate for this Remote.