Comtech EF Data VMS v3.12.x Vipersat - Manual (Page 57)

Chapter 2 - VMS Installation 2-17
MN/22156, rev 12 VMS Server Installation
Figure 2-16 License Agreement screen
4. The VMS software is comprised of two main components, the Server com-
ponent and the Client component. From the Installation Type screen shown
in figure 2-17, select the radio button for the type of installation you will be
making. For a VMS Server installation, select either Full Install or Server
Install. (The Client Install selection is for a VMS Client workstation installa-
tion.)
• Full Install - This type of installation installs both components, and
allows a local user to operate VMS locally on the server and also
remotely. This installation type requires a USB key to operate VMS.
• Server Install - This type of installation only installs the Server
component, and allows the VMS server to be operated through a remote
connection by a client—the VMS can not be operated from the local
server. This installation type requires a USB key to operate VMS.
• Client Install - This type of installation only installs the Client
component, and is used to install the VMS client on a workstation that
will be used to connect remotely to servers on the same LAN that are
running the VMS. This installation type does not require a USB key to
operate VMS.
10.X