Comtech EF Data VMS v3.12.x Vipersat - Manual (Page 194)

Network Manager Configuration MN/22156, rev 12
3-94 VMS User Guide
Note: When a reference site has been specified, the template of that site’s
parameters will auto-fill these next dialogs, requiring modifications only
to particular settings that differ for this new site.
10. Review the RF settings and edit this dialog if necessary, then click the Next
button.
For InBanded sites, the Return Path Home State Configuration dialog
will appear (figure 3-103). Continue with the next step.
For sites that are not InBanded, the Ready To Create window will appear
(figure 3-109). Proceed to step 17.
Figure 3-103 Return Path Home State Configuration, InBand
11. Again, this dialog is auto-filled from the reference site. Review and edit as
necessary, then click Next.
For Point-to-Point sites, the Forward Path Home State Configuration
dialog will appear (figure 3-104). Continue with the next step.
Otherwise, the Return Channel Bandwidth dialog will appear
(figure 3-105). Proceed to step 13.
NOTE