Comtech EF Data VMS v3.12.x Vipersat - Manual (Page 248)

Network MN/22156, rev 12
4-30 VMS User Guide
The mapping of packet to QoS group is based upon the subnets that are manu-
ally entered on a per-QoS Group basis. If the packet doesn't match a group, it
will fall back to the "Default" group.
Existing QoS Group entries can be either modified or deleted.
Click the Add Entry button to open the QoS Group Properties dialog and create
a new group (figure 4-20).
Figure 4-20 QoS Group Properties dialog
Group Name
Enter the designated name (1 to 20 characters) for the goup.
Valid characters:
Space ( ) * + - , . / 0 thru 9 and Aa thru Zz .
Committed Information Rate
Enter the minimum data rate (kbps) that is to be provided for the traffic flow for
a member of this group.
Maximum Information Rate
Enter the maximum data rate (kbps) that will be allowed for the traffic flow for a
member of this group.