Comtech EF Data VMS v3.12.x Vipersat - Manual (Page 400)

MN/22156, rev 12
A-4 VMS User Guide
Figure A-3 VMS Cross Banded Network Configuration
In response to the network configuration shown in figure A-3 the VMS would:
1. Create Satellite - Set center frequency to 6.1375GHz and translation
frequency to 2.225GHz
2. Create Transponder 4C (cross banded to Ku) - 6.005GHz, 36MHz
3. Perform a Translation Override = (6.005 – 11.78) = -5.775GHz
4. Create Pool, 3MHz at 6.020GHz
5. Create Transponder 12C - 6.165GHz, 36MHz
6. Create Pool 4, 2MHz at 6.166GHz
7. Create Transponder 4Ku - 14.155GHz, 36MHz
8. Perform a Translation Override = (14.08 – 3.78) = 10.30GHz
9. Create Pool 4, 3MHz at 14.170GHz