Comtech EF Data VMS v3.12.x Vipersat - Manual (Page 180)

Network Manager Configuration MN/22156, rev 12
3-80 VMS User Guide
To edit an inherited policy, the check box must be set as Clear with Check.
Then, the bit rates can be changed to the desired values for this group/site by
clicking on the policy, then clicking on the parameter to be changed and enter-
ing a new value.
Local Policies
In addition to modifying existing inherited policies, local policies specific to a
Remote site can be created, modified, and removed.
1. Open the Properties for an InBanded Remote site and select the InBand
Application Policies dialog, figure 3-84.
Figure 3-84 Application Policies dialog, Remote Site
2. Right-click in the open table space to Insert a new policy just for this site.
3. To edit a local policy, the check box must be set as follows:
• Clear – the Label can be changed
• Checked – the Label and Bit Rates can be changed
Then, the parameters can be modified as required for this group/site by
clicking on the policy, then clicking on the parameter to be changed and
entering a new name or value.