Comtech EF Data VMS v3.12.x Vipersat - Manual (Page 297)

Chapter 5 - Configuring ROSS Units 5-9
MN/22156, rev 12 Status and Control
Figure 5-7 ROSS Stored Configurations
Hardware/Software Configuration
Refer to the user documentation for the ROSS for details on the physical instal-
lation of the device. The documentation has detailed information on using the
unit’s front panel controls, a serial console connection, and a Telnet connection
and the command line interface for directly configuring the target ROSS.
A ROSS, when managed by the VMS as part of a communications network, has
its role and function in the network monitored and managed. The VMS
commands the ROSS to modify its configuration, as needed, to optimize
network performance. In addition, the ROSS can be controlled manually.
Note: Not all ROSS functions may be controlled by the VMS. Refer to the
device’s user documentation for instructions for using functions not avail-
able through the VMS.
NOTE