Comtech EF Data VMS v3.12.x Vipersat - Manual (Page 340)

VMS Service Managers MN/22156, rev 12
6-34 VMS User Guide
The divisions shown in the color bar will vary depending on a number of
factors, including the quantity and size(s) of the bandwidth pools, and the
amount of pre-allocated bandwidth.
Individual reservations can be enabled/disabled via the check box in the Identity
column. Reservation settings (Data Rate, Bandwidth, and Extra) can be edited
directly from this window by double-clicking on a table entry, as shown in the
figure.
Operator Switch Request
The Application Sessions switching control provides a means for the operator to
view/change/remove any active InBand switch sessions for a site, as well as to
manually set and execute a new application switch. The data rate, switch type,
and distribution list selection can be specified with this feature, as illustrated in
figure 6-41 and figure 6-42.
Figure 6-41 Application Sessions command
A session can be established quickly using the main InBand Sessions window
by specifying just the application type. The default data rate setting (0 bps) will
result in an attempt to switch using the pre-defined maximum and minimum
data rates specified by this application policy. Changing the default will force a
switch request using this new value for the Tx maximum (the ideal rate).
More options can be chosen by clicking on the ellipsis (...) button. Here, the
ideal and minimum data rates—for both Tx and Rx (P2P)—can be modified
from the defaults, as long as they fall within the defined range of the policy.
And, if a distribution list has been configured for use by this site, a destination
can be chosen from this list.