Comtech EF Data VMS v3.12.x Vipersat - Manual (Page 202)

Network Manager Configuration MN/22156, rev 12
3-102 VMS User Guide
complete the Globe View is specifying the position information for the sites. In
the VMS Network Manager, open the site Properties and enter the latitude and
longitude coordinates in the Position dialog.
This section describes the procedure for basic configuration of the Network
Manager in the VMS, and graphically displaying the network using Viper-
Globe. For configuring an SOTM network, refer to the section “SOTM Config-
uration” on page 3-110.
1. From the Tree View, right-click on the Network Manager icon and select
Create Network (figure 3-112).
2. In the Network Properties dialog that opens, enter a Network Name
(Vipersat Network is used in this example).
3. Expand the Network Manager to expose the new Network icon.
Figure 3-112 Creating the Network
4. Click-hold and drag-and-drop the Satellite(s) for this network from the RF
Manager onto the Network icon (figure 3-113).