Comtech EF Data VMS v3.12.x Vipersat - Manual (Page 118)

Vipersat Manager Configuration MN/22156, rev 12
3-18 VMS User Guide
Figure 3-13 Event Log Properties dialog
2. Enable (default) this function for use.
3. Set the Port number to be used (defaults to C008).
4. For changes, click the Apply button, then Close the window.
Configure Auto Activate
1. Click on the Server icon on the top menu bar and select Properties from the
drop-down menu.
2. Select the Redundancy dialog, then check the box for Auto Activate as
shown in figure 3-14. This will automatically activate the server processes
whenever the Vipersat Management System service is started.