Comtech EF Data VMS v3.12.x Vipersat - Manual (Page 518)

Server Configuration MN/22156, rev 12
G-2 VMS User Guide
Server Configuration
Most of the required configuration is done on the server. If the VMS administra-
tor creates a group and adds additional client users to that group, the security
settings need only to be performed once for each VMS server (primary and
backups). The following step by step instructions assume the administrator
creates a group called "VMS Users".
1. Create the VMS user group.
Log into the VMS server as the administrator and browse to Administrative
Tools\Computer Management\Local Users and Groups .
Expand the Local Users and Groups tree, right-click on the Groups folder
and select New Group from the drop-down menu, as shown in figure G-1.
Figure G-1 Computer Management, Groups
In the New Group dialog, enter the group name "VMS Users" and click
Create (figure G-2).
Close the window.