Comtech EF Data VMS v3.12.x Vipersat - Manual (Page 207)

Chapter 3 - VMS Configuration 3-107
MN/22156, rev 12 Network Manager Configuration
Multiple Networks can be created under Network Manager by repeating the
above procedure. Each of these Networks will appear as a separate network icon
in the upper left corner of the globe window. When an icon is selected (click to
highlight), the associated network element map will be displayed on the globe.
All Sites created for the same Network will appear together in a single map.
Note that this procedure only covers a portion of what is required to configure
the Network Manager, and is used to illustrate the functions in ViperGlobe. To
perform the complete configuration, follow the sequence provided earlier in this
chapter in Network Manager Configuration. The corresponding menu
commands for ViperGlobe are displayed in the figures below.
Figure 3-118 Command Menu, VMS Server
Figure 3-119 Command Menu, Network Manager