Comtech EF Data VMS v3.12.x Vipersat - Manual (Page 109)

Chapter 3 - VMS Configuration 3-9
MN/22156, rev 12 VMS Quick Configuration Guide
• InBand Application Policies
• Define InBand Distribution Lists
Perform Switching Function Verification [ page 3-83 ]
Create Additional Remote Sites with Remote Site Wizard [ page 3-88 ]
Configure Advanced Switching [ page 3-70 ]
Configure Redundancy [ page 3-110 ]
Configure N:M Hub Device Redundancy
Configure VMS Redundancy
Configure SOTM [ page 3-110 ]
1. Set the Dynamic parameter for the mobile remote(s).
2. Select the ROSS unit for the remote(s).
3. Create the Routes for Hub TDM outbound units.
4. Configure the QOS Rules for Hub TDM.
Configure Encryption [ page 3-116 ]
Management Security Option
This feature option is NOT included with the standard VMS package, and is
only available upon request from an authorized agent.
1. Enable Management and/or Switching encryption for the VMS server.
2. Enter the Encryption Key.
Modem TRANSEC Setting (SLM-5650A only)
Specify the number of FIPS Blocks per Frame for the modem.
E.
F.
G.