Comtech EF Data VMS v3.12.x Vipersat - Manual (Page 339)

Chapter 6 - VMS Services 6-33
MN/22156, rev 12 VMS Service Managers
Figure 6-40 Satellite Bandwidth Reservations
The Satellite Reservations window displays a table containing entries for each
Remote site (both Tx and Rx, if so enabled) that has been assigned a CIR, and
displays the following information:
• Reservation Enable/Disable — check box toggle. Status column display
reflects this setting, either Active or Inactive.
• Assigned, or Pre-Allocated, Bandwidth — currently reserved for
granting CIR when called for by the list of Remote sites presented in the
table. This segment is displayed as a numerical frequency value, and is
represented as the dark blue section of the bandwidth color bar. The Data
Rate, Bandwidth, and Extra (mod/code) parameters for each site is also
provided in the table.
• Available Bandwidth — currently unreserved and available for pre-
allocation to Remote sites. This segment is displayed as a numerical
frequency value, and is represented as the light green section (combined)
of the bandwidth color bar. The largest continuous/unfragmented block of
available bandwidth is represented by the light green section that is not
underlined with dark green.
• Fragmented Bandwidth — additional available bandwidth remaining
that is separate from the largest continuous block. This segment is
displayed as a numerical frequency value, and is represented as the light
green section of the bandwidth color bar that is underlined with dark
green.