Comtech EF Data CTOG-250 - Manual (Page 78)

CTOG-250 Comtech Traffic Optimization Gateway Revision 1
Updating Firmware MN-CTOG250
4–8
• Type “dir” to list the files extracted to the temporary directory from the
downloaded archive file.
The firmware files have been successfully downloaded and are now available for transfer to
the CTOG-250.
4.4 Performing the Ethernet FTP Upload Procedure
To proceed with the firmware update procedure, assumptions are made that:
• The CTOG-250 is connected to a user-supplied, Windows-based PC, and:
o The PC serial port is connected to the CTOG-250 ‘CONSOLE’ port.
o The PC Ethernet port is connected to the CTOG-250 ‘MGMT-1’ Ethernet
port with a user-supplied hub, switch, or direct Ethernet cable connection.
o The PC is running a terminal emulation program (for operation of the
CTOG-250 Serial Interface) and a compatible Web browser (for operation
of the CTOG-250 Web Server Interface).
• The CTOG-250 Management IP Address has been noted using the CTOG-250
Serial Interface, and the firmware has been identified using either the serial
interface or the CTOG-250 Web Server Interface ‘Admin | Firmware’ page.
• The latest firmware files have been downloaded or otherwise received from
Comtech EF Data and are available on the user PC in an accessible temporary
folder.
1. Use Command-line to send a “PING” command to confirm proper connection and
communication between the user PC and the CTOG-250:
• If the Management IP Address of the unit is still not known, type “info” at the serial
interface CTOG-250> command prompt and record the displayed information.
Alternately, use Serial Remote Control or the Web Server Interface:
o Serial Remote Control – Type the “<0/IPA?” remote query (without quotes) at the
serial interface CTOG-250> command prompt. The unit returns the configured
Management IP Address:
>0000/IPA=192.168.1.10/24 (default)
o Web Server Interface – View the IP Address/CIDR Mask entry on the ‘Configuration
| Interface | Mgt’ page: