Comtech EF Data CTOG-250 - Manual (Page 17)

CTOG-250 Comtech Traffic Optimization Gateway Revision 1
Preface MN-CTOG250
xv
Metric Conversion
Metric conversion information is provided on the inside back cover of this manual. Comtech EF
Data provides this information to assist the user in cross-referencing non-Metric to Metric
conversions.
The user should carefully review the following information:
Safety and Compliance
Electrical Safety and Compliance
The unit complies with the EN 60950 Safety of Information Technology Equipment (Including
Electrical Business Machines) safety standard.
IF THE UNIT IS OPERATED IN A VEHICLE OR MOVABLE INSTALLATION, MAKE SURE
THE UNIT IS STABLE. OTHERWISE, EN 60950 SAFETY IS NOT GUARANTEED.
Electrical Installation
CONNECT THE UNIT TO A POWER SYSTEM THAT HAS SEPARATE GROUND, LINE AND
NEUTRAL CONDUCTORS. DO NOT CONNECT THE UNIT WITHOUT A DIRECT
CONNECTION TO GROUND.
• Sect 3.2.2 CTOG-250 Power and Ground Connections
• Sect 3.3.2 CDM-800 Power and Ground Connections
Operating Environment
DO NOT OPERATE THE UNIT IN ANY OF THESE EXTREME OPERATING CONDITIONS:
• AMBIENT TEMPERATURES LESS THAN 10° C (50° F) OR MORE THAN 35° C
(95° F).
• PRECIPITATION, CONDENSATION, OR HUMID ATMOSPHERES OF MORE
THAN 95% RELATIVE HUMIDITY.
• UNPRESSURIZED ALTITUDES OF MORE THAN 2000 METRES (6561.7 FEET).
• EXCESSIVE DUST.
• FLAMMABLE GASES.