3 configuration | wan | compression – Comtech EF Data CTOG-250 User Manual
Page 141

CTOG-250 Comtech Traffic Optimization Gateway
Revision 1
Ethernet-based Remote Product Management
MN-CTOG250
7–39
From left to right:
Column
Description
WRED
Use the drop-down list to set Weighted Random Early Detection as Enable or
Disable. When WRED is enab led, the QoS Queue will attempt to smoothly
drop pac kets as t he queue becomes congested. This i s r ecommended f or
queues that will carry TCP packets.
Filter All
Use the drop-down list to set the flow filter setting as Disable or Enable.
7.4.4.3.2.3
Configuration | WAN | Compression
You must first enable Header and Payload Compression to use this page. Click the
Configuration∷Routing
hyperlink on this page to open the Configuration | Network
).
Appendix C. HEADER AND PAYLOAD COMPRESSION
With Working Mode set as Router (see Sect. 7.4.4.3.3.3 Configuration | Network | Working
Mode), use this page to configure, on a per-route basis, the available Header and Payload
Compression feature.
Figure 7-16. Configuration | Compression page
Click (Link to Compression Statistic Page
) hyperlink to monitor compression performance with
the Status | Statistics | Compression page (Sect 5.4.4.4.1.3).