Comtech EF Data CTOG-250 - Manual (Page 116)

CTOG-250 Comtech Traffic Optimization Gateway Revision 1
Ethernet-based Remote Product Management MN-CTOG250
7–14
The complete roster of FAST Accessible Options is as follows:
Option
Compression Hardware
Payload/Header Compression Card (CEFD KIT P/N KT-0000249)
Tx Symbol Rate Up to maximum Mbps
Tx Header Compression Enabled/Disabled
Tx Payload Compression Enabled/Disabled
QoS (Quality of Service) Group QoS
G.703 Clock Extension Enabled/Disabled
Tx Frequency IF (50-180 MHz) and L-Band (950-2150 MHz)
PTP (Precision Time Protocol) NOT AVAILABLE IN THIS FIRMWARE RELEASE.
FAST Upgrade
To perform the CDM-800 FAST option upgrade, follow these steps:
Step Task
1 Use the FAST Configuration table to view the currently installed features.
2 The serial number of the CDM-800 is
required by Comtech EF Data when
ordering FAST option upgrades.
Take note of this number, provided here in the FAST Upgrade section, before
contacting Comtech EF Data:
Serial Number: __________________________
3 Contact a Comtech EF Data sales representative during normal business hours:
• Provide the CDM-800 Serial Number to the representative.
• Identify and purchase the desired FAST option(s).
• Obtain the invoice, the 20-digit FAST Access Code, and the FAST option
activation instructions.
4 Carefully enter the FAST Access Code into the FAST Code register text box.
5 Click [Submit] to execute the FAST Upgrade.
6 The unit either accepts or rejects the code, and the FAST Configuration table
refreshes to reflect any upgrades in operation.