3 mgmt-1 connector (rj-45), 4 serial connector (db-9m) – Comtech EF Data CTOG-250 User Manual
Page 59
CTOG-250 Comtech Traffic Optimization Gateway
Revision 1
Back Panel Connections
MN-CTOG250
3–11
3.2.1.2.3
MGMT-1 Connector (RJ-45)
This 10/100/1000 Gigabit Ethernet interface is used for M&C
communications between the CTOG-250 and a user PC via the
CTOG-250 Web Server Interface.
Chapter 7. ETHERNET-BASED REMOTE PRODUCT MANAGEMENT
3.2.1.2.4
SERIAL Connector (DB-9M)
This EIA-232 interface is used for M&C communications between
the CTOG-250 and a user PC or VT (Video Terminal) device via the
CTOG-250 Serial Interface.
Chapter 6. SERIAL-BASED REMOTE PRODUCT MANAGEMENT
Table 3-1. SERIAL Connector Pinout
Pin # Description
Direction
1 GROUND
–
6
RESERVED - DO NOT CONNECT TO THIS PIN
–
2 EIA-232 RECEIVE DATA
IN
7
RESERVED - DO NOT CONNECT TO THIS PIN
–
3 EIA-232 TRANSMIT DATA
OUT
8
RESERVED - DO NOT CONNECT TO THIS PIN
–
4 RESERVED - DO NOT CONNECT TO THIS PIN
–
9
RESERVED - DO NOT CONNECT TO THIS PIN
–
5 GROUND
–