Comtech EF Data CTOG-250 - Manual (Page 44)

CTOG-250 Comtech Traffic Optimization Gateway Revision 1
Installation MN-CTOG250
2–4
• User-supplied screws to secure the unit front panels to the rack enclosure threaded
front mounting rails;
• The Slide Rails Kit and its accompanying mounting hardware (shipped with the
CTOG-250);
• Comtech EF Data’s optional KT/6228-2 (4”) or KT/6228-3 (10”) Rear-Mounting Support
Brackets Kit (for the CDM-800).
2.2.1 Installing the CTOG-250 Standard Slide Rails Kit
The CTOG-250 is shipped with a Slide Rails Kit (Figure 2-3). The instructions as
presented here are intended as an overview of the kit installation procedure.
Carefully read the instruction sheet that is packaged with the Slide Rails Kit.
Item Description
1 Inner Chassis Rail
2 Middle Slide (Extension) Rail
3 Outer Rack Rail
Figure 2-3. Installing the CTOG-250 Slide Rails Kit