Comtech EF Data CTOG-250 - Manual (Page 177)

8–1
Chapter 8. SERIAL-BASED REMOTE PRODUCT
MANAGEMENT
8.1 Introduction
Serial-based Remote Product Management of the CTOG-250 Comtech Traffic Optimization Gateway is available using the CTOG-250 back
panel ‘SERIAL’ port.
1. TO PROCEED WITH ETHERNET-BASED REMOTE PRODUCT MANAGEMENT (SNMP OR WEB SERVER), ASSUMPTIONS ARE
MADE THAT:
• The CTOG-250 and its CDM-800 Gateway Router are interconnected and are operating with the latest version
firmware files.
• The CTOG-250 is connected to a user-supplied, Windows-based PC as follows:
o The PC serial port is connected to the CTOG-250 back panel ‘SERIAL’ port with a user-supplied serial cable.
o The PC Ethernet port is connected to the CTOG-250 back panel ‘MGMT-1’ 10/100/1000 BaseT Gigabit Ethernet
port with a user-supplied hub, switch, or direct Ethernet cable connection.
o The user PC is running a terminal emulation program (for operation of the CTOG-250 Serial Interface) and a