Comtech EF Data CTOG-250 - Manual (Page 122)

CTOG-250 Comtech Traffic Optimization Gateway Revision 1
Ethernet-based Remote Product Management MN-CTOG250
7–20
• IP Address / CIDR Mask (8-30) – Use this box to enter the IP Address and CIDR (Classless
Inter-Domain Routing) Subnet Mask.
When in Router mode, the configured subnets must be unique. Overlapping
the subnets will not be allowed and the requested configuration will be
rejected.
• Link Configuration – Use the drop-down menu to select the line speed and duplex setting
for the CTOG-250 FE interface. The available selections are:
o Auto* o 100 BaseT / Full Duplex o 10 BaseT / Full Duplex
o 100 BaseT / Half Duplex o 10 BaseT / Half Duplex
* Auto is the recommended configuration selection.
• Negotiated Link Mode (read-only) – The actual negotiated line speed and duplex setting for
the FE Interface is displayed here. The viewable settings are 10 BaseT / Full Duplex, 10 BaseT
/ Half Duplex, 100 BaseT / Full Duplex, or 100 BaseT / Half Duplex.
Click [Submit] to save.