Comtech EF Data CTOG-250 - Manual (Page 153)

CTOG-250 Comtech Traffic Optimization Gateway Revision 1
Ethernet-based Remote Product Management MN-CTOG250
7–51
Route Table (Edit)
Use the text boxes and drop-down menus to edit the available manually created Route Table
entries, as described previously for the Add New Route section.
Click [Change] to save these settings. Alternately, click [Delete] to delete the specified route
entry from the route table.
Only manually created routes can be deleted. If user would like to delete a
dynamically created route, then the associated Remote Site must be deleted.
7.4.4.3.3.2 Configuration | Network | ARP (Address Resolution Protocol)
Use this page to configure the ARP (Address Resolution Protocol) parameters.
Figure 7-21. Configuration | Network | ARP page
Add Static ARP
Enter the desired IP and MAC addresses. Click [Add Entry] when done. The Index column
automatically increments to the next available number when the specified static ARP entry is
added to the ARP Table.