Comtech EF Data CTOG-250 User Manual

Page 185

CTOG-250 Comtech Traffic Optimization Gateway

Revision 1

Serial-based Remote Product Management

MN-CTOG250

8–9

INSTRUCTION

CODE

USED TO...

Page

MLC

Set or query the link configuration for the 10/100/1000 Gigabit Ethernet Management Port “MGMT-1”

8-13

NPS

Query the negotiated port speeds for the “LAN-1”, “LAN-2”, and “MGMT-1” ports

8-13

SRC

Set or query the SNMP Read Community String

8-13

SWC

Set or Query the SNMP Write Community String

8-13

These Instruction Codes are explained in complete detail in the tables that follow. Note that the Target-to-Controller Instruction Code

Qualifiers, described earlier, that appear in the “Response to Command” column carry the following meanings:

= Message OK.

? Received OK, but invalid arguments were found.

* Message OK, but not permitted in current mode.

# Message OK, but unit is not in Remote mode.

! Invalid instruction.