3 snmp interface, 1 management information base (mib) files – Comtech EF Data CTOG-250 User Manual
Page 105

CTOG-250 Comtech Traffic Optimization Gateway
Revision 1
Ethernet-based Remote Product Management
MN-CTOG250
7–3
Description
Default Address
User-assigned Address
Traffic-2
192.1.3.1
_________________________
WAN Egress
169.254.1.1
_________________________
ExpTraffic-1
192.1.4.1
_________________________
ExpTraffic-1
192.1.5.1
_________________________
7.3
SNMP Interface
The Simple Network Management Protocol (SNMP) is an Internet-standard protocol for
managing devices on IP networks. An SNMP-managed network consists of three key
components:
•
The managed device. This includes the CDM-800 Gateway Router (via the CTOG-250).
•
The SNMP Agent. The software that runs on the CDM-800. The CDM-800 SNMP Agent
supports both SNMPv1 and SNMPv2c.
•
The user-supplied Network Management System (NMS). The software that runs on the
manager.
7.3.1 Management Information Base (MIB) Files
MIB files are used for SNMP remote management of a unique device. A MIB file consists of a
tree of nodes called Object Identifiers (OIDs). Each OID provides remote management of a
particular function. These MIB files should be compiled in a user-supplied MIB Browser or SNMP
Network Monitoring System server. The following MIB files are associated with operation of the
CTOG-250:
MIB File/Name
(where ‘x’ is revision letter)
Description
ComtechEFData.mib
ComtechEFData Root MIB file
ComtechEFData MIB file gives the root tree for ALL Comtech EF Data
products and consists of only the following OID:
Name: comtechEFData
Type: MODULE-IDENTITY
OID: 1.3.6.1.4.1.6247
Full path:
iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).comtechEFData(6247)
Module: ComtechEFData
FW-0000431x_CDM800.mib
CDM-800 MIB file
MIB file consists of all of the OIDs for M&C. Note that both the CTOG-250 and
the CDM-800 use this file to manage standalone operation.