Comtech EF Data CTOG-250 - Manual (Page 174)

CTOG-250 Comtech Traffic Optimization Gateway Revision 1
Ethernet-based Remote Product Management MN-CTOG250
7–72
Once the reboot process resumes, the Utility | Reboot page is replaced with the dynamic
message “Please wait... AHA Upgrading is in process. Login will be required in XXXX seconds” –
the time count decrements to 0 seconds before the unit reboots. After the reboot, login is
required once again to resume use of the Web Server Interface.
Sync Configuration from CDM-800
Use this feature when adding a previously-standalone CDM-800 Gateway Router to a
CTOG-250. Once the CDM-800 is connected to the CTOG-250, click [Submit] to update all
CTOG-250 Web Server Interface pages with the configured parameters of the newly added
CDM-800.
Click [Submit] to initiate synchronization of the CDM-800 to the CTOG-250. A dialogue box
displays the result of the process on a pass/fail basis:
Click [OK] to resume use of the Utility | CTOG-250 Unit page.
Pass
Fail