Comtech EF Data CTOG-250 User Manual
Page 218

CTOG-250 Comtech Traffic Optimization Gateway
Revision 1
Appendix D
MN-CTOG250
D–4
D.2
Operating, Configuring, and Monitoring Header and Payload Compression
See Chapter 7. ETHERNET-BASED REMOTE PRODUCT MANAGEMENT for detailed
information on using the CTOG-250 Web Server Interface.
Use the following CTOG-250 Web Server Interface pages for the configuration, operation, and
monitoring of Header and Payload Compression:
• Configuration | Network | Routing
• Configuration | WAN | Remote Sites |
Configuration
• Configuration | WAN | Compression
• Status | Statistics | Compression
• Configuration | WAN | Mod
• Utility | CTOG-250 Unit
D.2.1 E nabling or Dis abling Header and P ayload C ompres s ion Operation
Header and Payload Compression is independent from QoS. The enabling or
disabling of this feature is only on the sending Comtech EF Data VSAT products
(CDM-840 or CTOG-250). The need to Header and Payload Decompress incoming
packets on the CDM-840 or CDD-880 is automatic and transparent to the user.
Figure D-1. Configuration | Network | Routing page