2 web server interface – operational features, 1 virtual front panel – Comtech EF Data CTOG-250 User Manual
Page 108

CTOG-250 Comtech Traffic Optimization Gateway
Revision 1
Ethernet-based Remote Product Management
MN-CTOG250
7–6
7.4.2 Web Server Interface – Operational Features
7.4.2.1 Virtual Front Panel
The CTOG-250 Web Server Interface features a read-only ‘Virtual Front Panel’ (VFP) at the top of
every page. Here, CTOG-250 functionality is combined with CDM-800 front panel real-time LED
operation. These virtual LEDs provide ‘heads-up’ operational status indicators that react to any
changes made to unit operation, and convey operational states as follows:
LED
Condition
UNIT STATUS
Green
No Unit Faults or Alarms.
Amber
No Unit Faults, but an Alarm exists.
Red
A Unit Fault exists (Example: PSU fault).
STORED EVENT
Amber
There is a Stored Event in the log, which can be viewed from the Web
Server Interface or retrieved via the SNMP interface.
Off
There are no Stored Events.
ONLINE
Green
The Unit is On Line, and carrying traffic.
Off
The Unit is Off Line (standby – forced by externally connected 1:1 or 1:N
Redundancy System).
TEST MODE
Amber
A Test Mode is selected (Example: CW).
Off
There is no Test Mode currently selected.
TRANSMITTER ON
Green
The Transmitter Carrier is On.
Off
The Transmitter Carrier is Off.
Tx TRAFFIC
Green (solid)
No Tx Traffic Faults, no packets.
Green (blinking)
No Tx Traffic Faults, blinks when a packet is being transmitted to the
satellite link from this unit.
Off
A Tx Traffic Fault exists.
LAN-1 and LAN-2
LINK/ACTIVITY
Green (solid)
LAN Traffic Ethernet is connected, but no traffic exists.
Green (blinking)
LAN Ethernet activity detected.
Off
LAN Traffic Ethernet is not connected.
CDM-800 COMM’S
Green (solid)
CDM-800 connectivity detected.
Off
CDM-800 is not connected.
WAN LINK/ACTIVITY
Green (solid)
WAN Traffic Ethernet is connected, but no traffic exists.
Green (blinking)
WAN Ethernet activity detected.
Off
WAN Traffic Ethernet is not connected.
EXPNET-1
LINK/ACTIVITY
(EXPNET-2 IS NON-
FUNCTIONING)
Green (solid)
Expansion Traffic Ethernet is connected, but no traffic exists.
Green (blinking)
Expansion Traffic Ethernet activity detected.
Off
Expansion Traffic Ethernet is not connected.