Comtech EF Data CTOG-250 - Manual (Page 58)

CTOG-250 Comtech Traffic Optimization Gateway Revision 1
Back Panel Connections MN-CTOG250
3–10
3.2.1.1.3 EXPNET-1 (Expansion Network) Port
The EXPNET-1 port is used to pass traffic coming back from remote sites when in
BPM (Bridge Point-to-Multipoint) mode.
3.2.1.1.4 EXPNET-2 (Expansion Network) Port (FUTURE)
This 10/100/1000 Gigabit Ethernet port is reserved for future use.
3.2.1.2 Utility Connector Group
3.2.1.2.1 MGMT-2 Connector (RJ-45) (FUTURE)
This 10/100/1000 Gigabit Ethernet port is reserved for future use and is non-
functional in this release. Do not remove the protective cap from this port.
3.2.1.2.2 Unit Identification Switch and LED (FUTURE)
Although the blue LED lights if the RESET button is pressed, this interface is
reserved for future use and is non-functional in this release.
• Chapter 7. ETHERNET-BASED REMOTE PRODUCT
MANAGEMENT
• Chapter 6. SERIAL-BASED REMOTE PRODUCT MANAGEMENT
• Appendix E. BRIDGE POINT-TO-MULTIPOINT (BPM)
OPERATIONS