AMETEK i Series - Manual (Page 318)

User Manual
304 i Series / iX Series
Switching Transients conform Figure A (Transparency). Tt is shown in the T1 column of the
table. This transient is repeated 5 times with a delay of 1 second (default) between transients.
Switching Transients conform Figure B. The T1, T2 and T3 values are shown on screen in the
table above the graph. Each permutation shown is repeated one time with a 1 second delay
(default) between transients.
Table 2 transients with roman numerals I through VI are supported as well be selection Figure B,
Table 2. F1 and F2 represent the test frequencies before and after the transient.