AMETEK i Series - Manual (Page 227)

User Manual
i Series / iX Series 213
9.4.7 Service and Maintenance
9.4.7.1 Cleaning
The exterior of the instrument may be cleaned with a cloth dampened with a mild detergent and
wrung out. Disconnect all sources of power (mains, i/iX-power sources, etc.) before cleaning.
Do not spray water or other cleaning agents directly on the instrument.
9.4.7.2 Fuses
There are two fuses used in the EOS-1 or EOS-3. They are located in the mains connector. For
continued protection against fire hazard, replace fuses with same type and rating.
Mains Voltage Fuse Rating Fuse Type CI Stock
Number
115 VAC, nominal 0.5 amp 3AG, slow acting 270064
230 VAC, nominal 0.25 amp 5x20mm, slow acting