AMETEK i Series - Manual (Page 235)

User Manual
i Series / iX Series 221
9.5.5 Service and Maintenance
9.5.5.1 Cleaning
The exterior of the instrument may be cleaned with a cloth dampened with a mild detergent and
wrung out. Disconnect all sources of power (mains, iX-power sources, etc.) before cleaning. Do
not spray water or other cleaning agents directly on the instrument.
9.5.5.2 Fuses
There is one fuse used in the Mode-iX phase controller. It is located in the mains connector. For
continued protection against fire hazard, replace fuse with same type and rating.
Mains Voltage Fuse Rating Fuse Type CI Stock Number
115 v rms, nominal 0.25 amp 3AG, slow acting 270117
230 v rms, nominal 0.125 amp 3AG, slow acting 270109