AMETEK i Series - Manual (Page 22)

User Manual
8 i Series / iX Series
2.1.5 DC Measurements (iX series)
Parameter Range Accuracy ( ) Resolution
Voltage 0 – 300 Volts 0.1 Volts 0.01 Volt
Current 0 – 40 Amps 0.01 Amps 0.001 Amp
Power 0 – 6.000 kW 0.05 kW 0.001 kW
Current and Power Accuracy specifications are times two for 10001iX and times three for 15001iX. For 10001iX and
15001iX, resolution decreases by factor of 10, ranges for current and power increases by factor of three.
2.1.6 Harmonic Measurements (iX series)
Parameter Range Accuracy ( ) Resolution
Frequency fundamental 16.00 - 500 Hz 0.01% + 0.01 Hz 0.01 Hz
Frequency harmonics 32.00 Hz - 19.5 kHz 2 typ. 0.5
Voltage Fundamental 0.25V 0.01V
Harmonic 2 - 50 0.25V + 0.1% +
0.1%/kHz 0.01V
Current Fundamental 0.05A 0.01A
Harmonic 2 - 50 0.05A + 0.1% +
0.1%/kHz 0.01A
Accuracy specifications are times three for three phase mode. Harmonics frequency range in three phase mode is
32 Hz - 6.67 kHz. Resolution decreases by factor of 10 for 10001iX and 15001iX.
2.1.7 System Specification
Parameter Specification
External
Modulation: 0 to 10%
Synchronization
Input: Isolated TTL input for external frequency control. Requires 5V at 5 ma
for logic high.
Trigger Output: 400 s pulse for voltage or frequency change. Isolated output that
requires a pull-up resistor, 22K , to + 5 VDC.
Non volatile
memory storage: 8 complete instrument setups and transient lists, 32 events per list.
Waveforms Sine (i series)
Sine, square, clipped, user defined (iX series)