EXFO RTU 310-310G IP Services Test Head - Manual (Page 91)

Creating and Starting a Test Case
Ethernet and Fibre Channel Application 79
EtherSAM (Y.1564) Test Case
6. Services must be enabled before starting the test. For enabling Services
and for additional configuration parameters, refer to EtherSAM Tabs on
page 321.
7. Click the Start button to start the test.
At least one of the EtherSAM (Y.1564) sub tests (Configuration Test or
Performance Test) has to be enabled to start the test. The sub-tests
that are enabled will be performed following this order: Configuration
Test and Performance Test.
8. For additional results, refer to EtherSAM Tabs on page 321.