beautypg.com

Clock synchronization – EXFO RTU 310-310G IP Services Test Head User Manual

Page 412

background image

System Tabs

400

RTU-310/310G

Clock Synchronization

Clock Synchronization

Note: Clock Synchronization is only available for Ethernet 10G.

Click System and Clock Synchronization.

RX

Configuration: Allows the selection and configuration of the input
clock. This clock will be used for test synchronization if External clock
has been selected during test setup and/or for the backplane
configuration when External clock mode is selected Interface Type:
Allows the selection of the clock interface. Choices are None, DS1, and
E1. The default setting is None.

Termination Mode: The termination mode is set to Term for DS1
and E1.

Line Coding: Allows the selection of the interface line coding. Choices
are:

For DS1: AMI and B8ZS. The default setting is B8ZS.

For E1: AMI and HDB3. The default setting is HDB3.

Framing: Allows the selection of the interface framing. Choices are:

For DS1: SF, and ESF. The default setting is SF.