EXFO RTU 310-310G IP Services Test Head - Manual (Page 26)

Getting Started
14 RTU-310/310G
SHUT DOWN / RESTART Button
SHUT DOWN / RESTART Button
The SHUT DOWN/RESTART button is used to either shut down or restart
(shut down and restart) the unit.
To shut down the RTU-310/310G unit:
Press the SHUT DOWN / RESTART button once. The RTU-310/310G unit
closes all applications and once done, the POWER/STANDBY LED will
flash to indicate that it is safe to disconnect the AC or DC power.
To wake up the RTU-310/310G unit:
Press the SHUT DOWN / RESTART button once while in standby mode.
The RTU-310/310G unit will restart. An LED sequence is displayed on
the RTU-310/310G front panel indicating the booting process. Once
powered up, the POWER/STANDBY LED turns on indicating that the
RTU-310/310G is ready to be used.
To reset the RTU-310/310G unit:
Press the SHUT DOWN / RESTART button for 5 seconds. The
RTU-310/310G unit will shut down without closing applications. Press
the SHUT DOWN / RESTART once again, an LED sequence is displayed
on the RTU-310/310G front panel indicating the booting process. Once
powered up, the POWER/STANDBY LED turns on indicating that the
RTU-310/310G is ready to be used.