beautypg.com

Connecting the ethernet lan port – EXFO RTU 310-310G IP Services Test Head User Manual

Page 42

background image

Getting Started

30

RTU-310/310G

Connecting the Management Interfaces

Connecting the Ethernet LAN Port

The RTU-310/310G LAN interface is designed to provide remote
connectivity to the unit through a typical management network.

To connect remotely to the RTU-310/310G:

Both the RTU-310/310G

unit and remote PC must be connect to the

same management network using standard straight through Ethernet
cables with RJ-45 connectors. Refer to Ethernet Cables on page 455 for
more information.

The remote PC must be running the EX-Vu remote application. Refer to
To log on to the RTU-310/310G interface using SUI: on page 37 or
Connect to the RTU-310/310G using TightVNC: on page 474 for more
information.

For RTU-310

For RTU-310G

Note: The LAN port is by default set to acquire the IP address from a DHCP

network device. It can alternatively be configured to use a static IP address
if required.

10/100 Mbps Ethernet LAN Port

10/100 Mbps Ethernet LAN Port